E06 ELEMENTS LOW ODOR FLOOR STRIPPER

A very low odor, low toxicity, non-corrosive, non-butyl floor seal and finish remover. Specially designed to remove Zinc free floor finishes as well as conventional floor finishes. This fast-acting floor finish remover dissolves multiple coats of finish without harsh alkalis, butyl Cellosolve, or strong ammonia odors. No neutralizing needed. Controlled foam and free-rinsing characteristics assure that no residue is left behind to interfere with subsequent finish applications.

DIRECTIONS
Sweep or dust mop the floor to remove any debris. Dilute Low Odor Floor Finish Stripper from 1:4 to 1:8, with room temperature or mildly warm water, depending on age and build-up of finish.

Apply liberally with a mop to an area small enough so as not to allow the product to dry. Be sure to completely cover floor to baseboards. After 3 to 5 minutes, agitate the wet section with a mop or machine scrub. Pick up solution using a mop, wet vac or automatic scrubber. Rinse thoroughly with clear water to remove residue as necessary.

Asphalt tile and rubber flooring could be affected by stripping solutions in high concentrations with hot water. Always test floor before proceeding.

2 2.5 GALLONS PER CASE
ENVIRONEMENTALLY RESPONSIBLE PRODUCT ECOLOGO